Milwaukee, WI
North Capabilities

Precision Metrology’s North Branch calibration and repair capabilities include, but are not limited to the following services. Click on the links on the left to bring up the Capabilities availible-
 All Services Traceable To NIST. Please reference our A2LA Scope of Accreditation for complete listing
Dimensional Gages and Equipment Hard and Fixed Gages
Contract Inspection Service Machine Tool Calibration
Coordinate Measuring Machines/Layout Tables Paint Thickness Equipment
Data Acquisition Cards Sand Strength and Foundry Equipment
Electronic Standards Surface Plates
Electronic Test and Measuring Equipment Temperature and Humidity
Flow Gages to 100SLM Torque, Force, Pressure and
Geometric and Reference Devices WeightsVibration


DIMENSIONAL GAGES & EQUIPMENT: : Milwaukee, WI
*A2LA Accredited Services
  • Air Gages *
  • Amplifier with probe*
  • Bore Gage *
  • Bore Gage Setting Master *
  • Brinell Scopes *
  • Calipers dial/digital/vernier *
  • Caliper Internal *
  • Caliper Depth *
  • Chamfer Check *
  • Coating Thickness Gages *
  • Comparators ID/OD*
  • Contracers
  • Dial Groove *
  • Digital Readouts *
  • Film Thickness *
  • Gloss Meters *
  • Hardness Testers (Rockwell/Brinell) *
  • Hardness Testers-Hand Held *
  • Hardness Testers-Micro/ Superficial *
  • Height Gage dial & electronic*
  • Height Reference/Riser Blocks *
  • Height Set Masters*
  • Horizontal Setting Machines *
  • Hydrometer Master Floats *
  • Indicator Chamfer *
  • Indicator Calibrator/Universal*
  • Indicator Co-ax *
  • Indicator Dial/Test - Mechanical *
  • Indicator Digital - Electronic *
  • Indicator Intertest *
  • Kwik Chek Hole Gage *
  • Laser Services *
  • Levels Electronic
  • Micrometers Bench *
  • Micrometer Depth *
  • Micrometers Groove *
  • Micrometers Indicating *
  • Micrometers Inside to 120" *
  • Micrometer Heads direct reading *
  • Micrometer Heads Simple *
  • Micrometer Heads Super Precision *
  • Micrometer Multi Anvil *
  • Micrometer Outside *
  • Micrometer Thread *
  • Micrometers Tri Bore *
  • Micrometer V Anvil *
  • Microscopes
  • Optical Comparators *
  • Optical Flats *
  • Oxygen Monitors
  • PI Tapes to 780" *
  • pH Meters *
  • Profilometers *
  • Rail Gage with Indicator*
  • Riser Blocks Height Reference*
  • Rotary Tables
  • Roundness Tester *
  • Shadowgraphs*
  • Snap Gage with Indicator*
  • Supermicrometers *
  • Surface Roughness Specimens *
  • Tachometers *
  • Test Indicators *
  • Thickness Gage *
  • Univeral Length Measuring Machine *
  • Vernier Height Gage *
  • Vernier Tooth Gear *
  • Vertical Measuring Systems *
  • Wire Crimpers *
  • Zygo Laser Mics *
BACK TO TOP


CONTRACT INSPECTION SERVICES: Milwaukee, WI
*A2LA Accredited Services
  • First Article *
  • Reverse Engineering
  • Fixture Calibration
  • Capability Studies
  • Virtual DMIS CMM Software
BACK TO TOP


COORDINATE MEASURING MACHINE AND LAYOUT TABLES: Milwaukee, WI
*A2LA Accredited Services
  • Calibration services in accordance with ASME B89.4.1-1997 *
  • Preventative maintenance
  • Repair/adjustment services
  • Electronic troubleshooting
  • Laser calibration using API 5-D laser *
  • Scale retrofits
  • Virtual DMIS retrofits
BACK TO TOP


DATA ACQUISITION CARDS: Milwaukee, WI
*A2LA Accredited Services
  • Hewlett Packard/Agilent *
  • National Instruments *
  • Tektronix*
    Field Services Available
BACK TO TOP


ELECTRONIC STANDARDS: Milwaukee, WI
*A2LA Accredited Services
  • 8 1/2 digit Multimeters *
  • AC Calibrators *
  • DC Voltage Calibrators *
  • Meter Calibrators *
  • Liquid-in-Glass Thermometers
  • RTD probes
  • Bi-Metal Thermometers
  • PRT's
  • Infrared Thermometers
  • Electronic Temperature Measuring Devices
  • Multi Function Calibrators w/ scope options to 1.1GHz *
  • Oscilloscope Calibrators *
  • Sourcemeters/Picoammeters *
  • Liquid-in-Glass Thermometers
  • RTD probes
  • Bi-Metal Thermometers
  • PRT's
  • Thermocouples
  • Temperature Calibrator
BACK TO TOP


ELECTRONICS TEST & MEASURING EQUIPMENT: Milwaukee, WI
*A2LA Accredited Services
  • Amplifiers *
  • Analog Meters *
  • Ammeters *
  • Bridges
    • Impendance
    • LCR *
    • Wheatstone *
    • Resistance *
    • Capacitance *
    • Inductance *
  • Capacitors *
  • Clamp-on Meters *
  • Conductivity Meters *
  • Current Shunts *
  • Curve Tracers*
  • Data Loggers *
  • Decade Resistors/Boxes *
  • Frequency Counters to 40GHz *
  • Function Generators *
  • High Voltage Probes/Meters *
  • Hypot Testers *
  • Impedance Meters
  • LCR Meters *
  • Line Impedance stabilization Networks *
  • Logic Analyzers *
  • Meggers *
  • Micro-Ohmmeters *
  • Network Analyzers to 26GHz or bnc type
  • FFT Network Analyzers to 26GHz
  • Oscillators
  • Oscilloscopes *
  • Ovens/Surveys *
  • Panel Meters *
  • Phase Meters
  • Phase Noise
  • Power Analyzers*
  • Power Meters*
  • Power Sensors*
  • Power Supplies *
  • Pyrometers *
  • Safety Analyzers
  • Signal Generators to 25.5GHz *
  • Sound Level Meters *
  • Spectrum Analyzers to 26GHz *
  • Stop Watches *
  • Tachometers *
  • Timers *
  • Vibration Analyzers
  • Voltmeters *
  • Volt-Ohm Meters *
  • Weldscopes *
BACK TO TOP


FLOW/LEAK TESTING TO 100SLM: Milwaukee, WI
*A2LA Accredited Services
  • Flow Masters
  • Laminar Flowmeters
  • Leak Orifice
  • Metering Valves
  • Orifice Plates
BACK TO TOP


GEOMETRIC & REFERENCE DEVICES: Milwaukee, WI
*A2LA Accredited Services
  • 1-2-3 Blocks *
  • Angle Plates granite & steel *
  • Bench Centers
  • Center Head *
  • Combination Squares *
  • Fixtures/Functional Gages *
  • Flush Pins/Relation Gages *
  • Hole/Slot Gages *
  • Levels master precision *
  • Parallels *
  • Precision Diameter Tapes *
  • Protractors *
  • Rules & Scales *
  • Sine Bars *
  • Squares blade & master precision *
  • Straight Edges *
  • Sine Plates *
  • Snap Gages *
  • Tape Measures *
  • Telescope Gages *
  • V Blocks *
BACK TO TOP


HARD GAGES: Milwaukee, WI
*A2LA Accredited Services
  • Acme, Buttress, British, German (DIN STD.) Rings & Plugs *
  • Angle Blocks *
  • Angle Plates*
  • Calibration Balls*
  • Check Width Gages*
  • Concentricity Gages*
  • Cylindrical & Flat Plug Gages to 24" *
  • Cylindrical Rings to 36" *
  • Feeler Gages *
  • Fillet Gages *
  • Flush Pin Gages *
  • Gage block/linear stacks 48" *
  • Gage Blocks to 20" *
  • Gear Wires *
  • Kalmasters *
  • Keyway Gage *
  • Leitech Masters & Thread Plugs *
  • Master Setting Discs to 24" *
  • Micrometer Length Standards (up to 120") *
  • Micrometer Masters *
  • NPT, NPTF, BSPT & ANPT Threaded Ring & Plug Gages *
  • Optical Flats *
  • Parallels *
  • Pin Gages *
  • Pi Tapes *
  • Pitch Mic Standards *
  • Precision Scales *
  • Precision Measuring Rules *
  • Protractors *
  • Radius Gages *
  • Screw Pitch Gages *
  • Set Masters *
  • Sine Bars *
  • Snap Gages *
  • Spacer Blocks *
  • Specialty Type Gages & Fixtures *
  • Spline Gages *
  • Squares *
  • Tapered Plug & Ring Gages *
  • Telescoping Gages *
  • Thickness Gages *
  • Thread Length Standards *
  • Thread Measuring Wires *
  • Thread Pitch Gages *
  • Thread Ring & Plugs to 18" *
  • Tru-Position Gages *
  • And Much more..…
BACK TO TOP


MACHINE TOOL CALIBRATION: Milwaukee, WI
*A2LA Accredited Services
  • Comprehensive testing using API 5-D laser *
  • Volumetric Testing *
  • DRO compensation *
BACK TO TOP


PAINT TEST EQUIPMENT: Milwaukee, WI
*A2LA Accredited Services
  • Bird Applicators *
  • Cryptometer base/wedge *
  • Extrusion Plastometer
  • Sag meter *
  • Viscometer *
  • Viscosity Cup
  • Weight/gallon cup
  • Zahn cup
BACK TO TOP


SAND STRENGTH & FOUNDRY EQUIPMENT: Milwaukee, WI
*A2LA Accredited Services
  • AFS Clay Tester *
  • Cone Jolt Toughness Tester *
  • Frability Tester *
  • Green Hardness Tester *
  • Hot Tensile Tester *
  • Melt Point Apparatus *
  • Moisture Teller *
  • Mold Strength Tester *
  • Permeability Meter *
  • Sand Rammer/Compactability Tester *
  • Sand Squeezer *
  • Sand Specimen Tubes *
  • Sand Strength Machines*
  • Ultrasonic Cleaner *
  • Wet Tensile Tester *
BACK TO TOP


SURFACE PLATES: Milwaukee, WI
*A2LA Accredited Services
  • Lapping & Certification
  • Grade AA (Laboratory) *
  • Grade A (Inspection) *
  • Grade B (Toolroom) *
  • Leveling Services
BACK TO TOP


TEMP. & HUMIDITY: Milwaukee, WI
*A2LA Accredited Services
  • Bi-Metal thermometers
  • Chart/Strip Recorders *
  • Dry-Well Calibrators *
  • Electronic Temperature Measuring Devices
  • Humidity Recorders
  • Infrared Thermometers *
  • Liquid-in-Glass Thermometers *
  • Mercury Thermometer *
  • Mercury Thermometer *
  • Oven Surveys
  • PRT's
  • RTD Probes
  • Temperature Calibrators
  • Temperature Controllers *
  • Temperature Indicators (Meters/ RTD/ Thermocouple/ Thermistor/ Sensors/ Probes) *
  • Thermocouples
  • Thermometers - digital & mercury *
  • Psychrometers - Humidity
BACK TO TOP


TORQUE, FORCE, PRESSURE, WEIGHTS: Milwaukee, WI
*A2LA Accredited Services
  • Cable Tensionmeters *
  • Durometers *
  • Durometer Calibrator *
  • Durometer Specimen *
  • Dynamometer & Force Rings *
  • Dead Weight Tester
  • Flow/Leak Testing to 100SLM *
  • Force Gage gram/correx *
  • Force Gages *
  • Load Cells *
  • Manometers*
  • Pneumatic Torque Wrenches *
  • Pressure Calibrators*
  • Pressure Gages *
  • Pressure Transducers *
  • Pressure/Vacuum Gages *
  • Scales *
  • Spring Tester *
  • Tensile Tester *
  • Torque Analyzers *
  • Torque Screwdrivers *
  • Torque Testers *
  • Torque Transducers *
  • Torque Watches *
  • Torque Wrenches *
  • Ultrasonic Testers*
  • Vacuum Gages *
  • Vacuum Transducers *
  • Weights to 150lbs *
  • Wire Tension Meters *
BACK TO TOP


VIBRATION: Milwaukee, WI
*A2LA Accredited Services
  • Accelerometers *
    • Single Axis *
    • Dual Axis *
    • Tri Axis *
  • Charge Amplifiers *
  • Signal Conditioners *
  • Vibration Meters *
BACK TO TOP




Precision Metrology North: 7350 North Teutonia Avenue • Milwaukee, WI • 53209 • Phone: 414-351-7420 • Fax: 414-351-7429
Precision Metrology South : 14435 Seventh Street • Dade City, FL • 33523 • Phone: 352-523-1900 • Fax: 352-523-2881